Generating LOD-1 representation of buildings using CGAL

irma

ufr

cemosis

numpex

Intern : Dorian Geraldes Pereira (Master 1 CSMI - csmi.cemosis.fr)
Advisors : Vincent Chabannes and Pierre Alliez

1. Introduction

Welcome to the Building Lod 1 project report

2. Tools:

In this section you can find every tool used in this project

3. Data:

All information about the data used in this project

4. Methodology:

In this section you can find the methodology used during this project

5. Implementation

In this section you can find the parameters used to run the application as well as the implementation details

6. Compile and Execute

To compile and execute, follow the instruction here:

7. Result

Presentation of the results:

8. Conclusion

Conclusion:

References

  • [CGAL] The CGAL Project. CGAL User and Reference Manual. CGAL Editorial Board, 6.0 edition, 2024 > link

  • [MG] Pierre Alliez and Clément Jamin and Laurent Rineau and Stéphane Tayeb and Jane Tournois and Mariette Yvinec. 3D Mesh Generation. In CGAL User and Reference Manual. CGAL Editorial Board, 6.0 edition, 2024 > link

  • [SSPO] Fernando Cacciola and Sébastien Loriot and Mael Rouxel-Labbé. 2D Straight Skeleton and Polygon Offsetting. In CGAL User and Reference Manual. CGAL Editorial Board, 6.0 edition, 2024. > link

  • [PMP] David Coeurjolly and Jaques-Olivier Lachaud and Konstantinos Katrioplas and Sébastien Loriot and Ivan Pađen and Mael Rouxel-Labbé and Hossam Saeed and Jane Tournois and Ilker O. Yaz. Polygon Mesh Processing. In CGAL User and Reference Manual. CGAL Editorial Board, 6.0 edition, 2024 > link

  • [FEELPP] Feelpp. Open-Source C++ library > link

  • [CEMOSIS] Cemosis. Innovation through modeling, simulation, optimisation and high performance computing > link

  • [IRMA] Irma. Institute for Advanced Mathematical Research > link

  • [NUMPEX] Numpex. French program dedicated to Exascale > link

  • [HIDALGO2] Hidalgo2. HPC and big data technologies for global challenges > link

  • [MESHLAB] Meshlab. Open source system for processing and editing 3D triangular meshes > link

  • [PARAVIEW] Paraview. Open source post-processing visualization engine > link

  • [UFR] UFR, > link

  • [STL] STL, File Format > link

  • [JSON] JSON , File Format > link

  • [VTU] VTU, File Format derived from VTK > link